Factors That Could Be Affecting the Accuracy of one’s Load Cell & Torque Sensors

The whole point of having lots cell & torque sensor is usually to be able to weigh your loads sufficiently and accurately, so when they’re not giving us the accuracy that we expect, it leaves us wondering precisely what could be affecting the accuracy of our equipment. Well, there are a number of reasons as to the reasons your load cell & torque sensors aren’t providing the higher level of accuracy that you would expect, with each of them being listed below.

The Accuracy of the Load Cell & Torque Sensors

The very first thing you need to be doing if you are chasing accurate weighing accuracy is to select a top quality load cell & torque sensors manufacturer. While all manufacturers will proclaim that their products offer high degrees of accuracy, only the most notable brands will usually be able to deliver the best accuracy.

A good load cell and its own torque sensors will generally have good response times (how quickly they provide an accurate reading), will not react to much to temperature changes in the surroundings, will not suffer with creep (a big change in the reading after 2-3 minutes to be stationary), and will have very low ‘nonrepeatability’ (differences in the readings for exactly the same load after repeated loadings).

Loadcell with the Load

The accuracy of a load cell & indicator reading can be affected by the way the load is placed on the weighing system. To ensure an accurate reading, the load has to be put on each cell properly and as specified by the manufacturer.

If a load has been applied poorly, including the load being twisted, the cell and weighing system is only going to throw up inaccurate results. To make sure complete accuracy when weighing, the load has to be put into such a way that are supporting each of the weight proportionally.

Outside Forces

Another reason as to why accuracy may be affected on a load cell & torque sensor may be the many outside forces that could be slightly altering the weight force. Wind, shock loading, vibration, and changes in temperature can all impact the real accuracy of a reading.

A cross-wind can have an impact that the strain feels lighter than it actually is while shock is the procedure for gaining more load weight than what the weight capacity of the cells are. Vibrations from other nearby machines may also cause fluctuations in a weight whilst temperature changes in the surroundings can cause materials in the load to either expand or contract.

Signal Interference

The final manner in which the accuracy of the weight of lots could be affected is through interference with the signal transmission. The load cell electrical signal can be experience interference from radio frequencies, electromechanical interference, and also moisture in the air could cause interference to the electrical signal.


So in order to make sure that your load cell & torque sensors are as accurate as you possibly can; you should be well aware of just what could affect that accuracy and put measures set up to prevent those occurrences from happening. Simply utilize the best manufacturers of load cells & torque sensors leading brands, load them correctly, ensure that outside forces are limited, and that there surely is little potential for signal interference.

Leave a Reply

Your email address will not be published. Required fields are marked *